Every rule your project must meet, found for you.
Search Northern Ireland’s planning and building-control guidance, ask a question in plain English, or generate a project compliance checklist — every answer cited to the source.
Working to a specific project? Generate a compliance checklist →
Answers, with citations
Ask in plain English and get an answer that links to the exact source clause — never an unsourced guess.
Scoped to your council
Overlay a council's local development plan on the Northern Ireland-wide regulations and policy.
Project compliance checklist
Characterise a project and get the requirements that apply, grouped by work area. Try it →
The library
Search the source guidance
6 results · filtered
Introduction to Section 6 - Oil and LPG Fuel Storage Protection
0.10NI-wide·Technical Booklet L Combustion Appliances and Fuel Storage Systems
Section 6 gives guidance – (a) on the measures to be taken to protect an oil or LPG fuel storage installation – (i) from a fire in the building it serves; and (ii) where the installation is located ad
fuel-storagefire-safetyoillpgFire wall height and horizontal extent for LPG tanks
6.15NI-wide·Technical Booklet L Combustion Appliances and Fuel Storage Systems
A fire wall should be not less than the height of the pressure release valve and should extend horizontally such that the separation distance specified in Table 6.2, Column (B) is maintained – (a) whe
fuel-storagelpgfire-safetyFire protection separation distances for LPG storage tanks
Table 6.2NI-wide·Technical Booklet L Combustion Appliances and Fuel Storage Systems
Fire protection for LPG storage tanks Capacity of tank (tonnes) | Minimum separation distances from buildings, boundaries or fixed sources of ignition | To a tank with no f
fuel-storagelpgfire-safetynon-domesticSeparation and shielding of LPG tanks up to 1.1 tonne capacity
Diagram 6.1NI-wide·Technical Booklet L Combustion Appliances and Fuel Storage Systems
Diagram 6.1 Separation or shielding of liquified petroleum gas tanks of up to 1.1 tonne capacity from buildings, boundaries and fixed sources of ignition Configurations shown: (a) No fire wall (b) Se
fuel-storagelpgfire-safetysite-planningLocation and support of LPG cylinders
D.1, D.2NI-wide·Technical Booklet L Combustion Appliances and Fuel Storage Systems
D.1 The advice given in paragraph D.2 and Diagram D1 is informative and may be considered for an LPG storage installation that consists of a set of two or more cylinders having a combined capacity gre
fuel-storagelpgexternal-spacesafety-distanceDiagram D1 - Location of LPG cylinders
Diagram D1NI-wide·Technical Booklet L Combustion Appliances and Fuel Storage Systems
Diagram D1 Location of LPG cylinders minimum dimensions measured from nearest cylinder valve: W = 250 mm X = 1000 mm Y = 300 mm Z = 2000 mm
fuel-storagelpgexternal-spacesafety-distance