Every rule your project must meet, found for you.
Search Northern Ireland’s planning and building-control guidance, ask a question in plain English, or generate a project compliance checklist — every answer cited to the source.
Working to a specific project? Generate a compliance checklist →
Answers, with citations
Ask in plain English and get an answer that links to the exact source clause — never an unsourced guess.
Scoped to your council
Overlay a council's local development plan on the Northern Ireland-wide regulations and policy.
Project compliance checklist
Characterise a project and get the requirements that apply, grouped by work area. Try it →
The library
Search the source guidance
3 results · filtered
Classification of Lining Material Performance
3.4NI-wide·Technical Booklet E Fire Safety
The surface spread of flame classification of a lining should be ascertained by testing in accordance with BS 476: Part 7. The classifications given in such tests are Classes 1, 2, 3 and 4. Class 0 is
fire-safetyinternal-liningsmaterialsClassification of Thermoplastic Materials
3.5NI-wide·Technical Booklet E Fire Safety
The term thermoplastic material includes all synthetic polymeric materials which have a softening point lower than 200ºC when tested to BS EN ISO 306: Method A120 Plastics. For the purposes of this Se
fire-safetymaterialsThermoplastic Material Surface Requirements When Used as Lining
3.6NI-wide·Technical Booklet E Fire Safety
Where a thermoplastic material is used as a lining to protect a wall or ceiling but is not fully bonded to a non-thermoplastic substrate the surfaces of both the thermoplastic material and the substra
fire-safetymaterialsprotection-from-falling