Technical Booklet F1 Conservation of Fuel and Power in Dwellings·Page 24·Table 2.1

Fuel Factors Table

Table specifying the fuel factor values for different heating fuels used in the TER calculation, ranging from 1.00 for mains gas to 1.47 for grid electricity.

Heating fuel Fuel factor Mains gas 1.00 LPG 1.10 Oil 1.17 B30K 1.00 Grid electricity for direct acting and storage systems 1.47 Grid electricity for heat pumps 1.47 Solid mineral fuel(1) 1.28 Any fuel with a CO2 emission factor less than that of mains gas 1.00 Solid multi-fuel(1) 1.00 Note: (1) The specific fuel factor should be used for those appliances that can only burn that particular fuel. Where an appliance is classed as multi-fuel, the multi-fuel factor should be used except where the dwelling is in a Smoke Control Zone. In such cases the solid mineral fuel factor should be used unless the specific multi-fuel appliance has been approved for use in a Smoke Control Zone.

Source — /Users/richardhill/Documents/planning-arch-project/data/documents/regional/Technical Booklet F1 - Conservation of Fuel and Power in Dwellings.pdf